Neuer Ten-Bagger: Highbank Res
Seite 1 von 1 Neuester Beitrag: 29.11.07 22:19 | ||||
| Eröffnet am: | 26.10.07 16:59 | von: RiscTec | Anzahl Beiträge: | 10 |
| Neuester Beitrag: | 29.11.07 22:19 | von: RiscTec | Leser gesamt: | 4.254 |
| Forum: | Hot-Stocks | Leser heute: | 1 | |
| Bewertet mit: |  | |||
Noch nicht gepusht in Deutschland.
Nur 10 Mio$ Marketcap.
Die Konkurrenz (TSX:PLS) Polaris bei 500 Mio$ Marketcap. Die haben 1 Jahr Vorsprung...
Der 43-101 steht jeden Tag an - Nach Stockhouse angeblich jeden Tag jetzt möglich.
Nach der letzten PR ist die Environmental Studie schon auf dem Weg und sollte dann den 43-101 Report ermöglichen:
Highbank Resources Ltd. (“TSX.V – HBK”) reports further to our June 20,2007 news release. Fieldwork continues on the Portland Canal Aggregates Project in preparation of the application for an Environmental Assessment Certificate under the provincial environmental assessment review process. Once approved, this leads to the issuance of an Operating Permit for this sand, gravel, and aggregates deposit.
Associated Geosciences Ltd. of Calgary, Alberta is preparing a NI 43-101 Technical Report on the property’s mineable sand and gravel resource. The report will verify drilling results and determine the optimal mine layout for preparation of a formal Mine Plan.
Schaut es Euch einmal an:
http://highbankres.com/
Angehängte Grafik:
charts_histproc.png (verkleinert auf 61%)
charts_histproc.png (verkleinert auf 61%)
http://www.polarmin.com/
anschauen.
Der Chart sieht so aus: (Das sollte Highbank ab jetzt wiederholen...)
Angehängte Grafik:
caibcfrc.gif
caibcfrc.gif
Wenigstens haben wir damit die 10 Mio C$ Marktkapitalisierung erreicht.
http://www.stockhouse.com/...K&table=LIST&view=staticchart&duration=0
Positiv stimmt mich das der Kurs einen leichten Aufwärtstrend bei der Warterei auf den 43-101 Report zeigt.
Das bedeutet der Markt erwartet einen positiven Report.
Bei der geringen Marktkapitalisierung im Gegensatz zur vorauseilenden Polaris PLS (500 Mio C$) ja auch kein Wunder.
Kurs steigt auf 0,47 C$
So langsam kommt hier Druck rein.
Wenn jetzt ein guter 43-101 kommt dann explodiert das Teil !
Time Price Shares $ Change Buyer Seller
12:17 0.420 2,000 -0.040 Ntl. Bank Fin. RBC
12:17 0.425 20,000 -0.035 BMO Nesbitt RBC
12:17 0.430 10,000 -0.030 TD Securities RBC
12:17 0.435 5,000 -0.025 TD Securities RBC
12:17 0.435 13,000 -0.025 Canaccord RBC
12:04 0.435 37,000 -0.025 Canaccord RBC
12:04 0.440 5,000 -0.020 Ntl. Bank Fin. RBC
12:04 0.440 1,000 -0.020 RBC RBC
12:04 0.450 7,000 -0.010 TD Securities RBC
11:38 0.450 2,000 -0.010 TD Securities Anonymous
Die 0,40 C$ Warrants sind am 9.11. fällig.
Bis dahin wird wohl der Kurs nicht zu weit von der 0,40 weggehen.
Aber dann...wenn der 43-101 kommt geht es ab.
Verrückte Welt.
HBK hält sich noch ganz gut: 0,405 C$ den ganzen Tag und jetzt kurz vor Schluss hat noch jemand bei 0,39 C$ 10K Stück geworfen. - Morgen ist kein Verkaufsdruck durch Warrant Ausübung mehr da.
Dann könnte mal langsam der 43-101 kommen...
Letzte Meinung von IR vor 2 Wochen war das er jeden Tag kommen kann...
Wenn er positiv ist (> 80 Mio t) rechne ich mit Ausbruch Richtung 1 CAN$ !!!
Am besten warten bis der Markt für Rohstoff Werte morgen oder übermorgen wieder anzieht nd dann diesen Schwung mitnehmen...
Polaris Zahlen sind o.k. mit gutem Ausblick aufgrund der guten Auftragseingänge.
Das bestätigt die Marktchancen für HBK !
HBK verfügt über 71 MioT hochwertiges Baumaterial bei einer Marketcap von zur Zeit 10 Mio C$:
http://www.stockhouse.ca/comp_info.asp?symbol=HBK&table=LIST
Dagegen verfügt Polaris TSX-V:PLS über 205 Mio T: siehe Folie 42 in der Präsenation:
http://www.polarmin.com/downloads/...0December%20corporate%202007.pdf
Bei einer Marketcap von 470 Mio C$.
http://www.stockhouse.ca/comp_info.asp?symbol=PLS&table=list
Das bedeutet HBK müsste eigentlich bei einem Drittel der PLS Bewertung stehen wenn man die Verladeeinrichtung aufbaut (ca.10 Mio $ Kosten).
Das wären gut 150 Mio C$ Marketcap Ziel für HBK oder 1500% Kurspotential !!!
HIGHBANK RECEIVES TECHNICAL REPORT AND RESOURCE ESTIMATE
Highbank Resources Ltd. (the “Company”), (“TSX.V – HBK”) is pleased to announce the receipt of a NI 43-101 Technical Report on the ‘Portland Canal Aggregates Corporation -Swamp Point North Property’ (the “Property”) located on the east shore of Portland Canal, approx. 50 km south of Stewart in northwestern British Columbia.
In February 2005, the Company entered into an Earn-In Agreement with Portland Canal Aggregates Corporation (“PCAC”) to acquire a 100% Working Ownership Interest (the “WOI”) in PCAC’s Property. To earn its WOI the Company has completed all aspects of the Agreement including the issuance of 2,000,000 common shares, completion of $1.3 million in work expenditures in stages and other advance royalty payments.
Associated Geosciences Ltd. (“AGL”) of Calgary, Alberta was commissioned by the Company and PCAC to prepare a NI 43-101 Technical Report on the property’s mineable sand , gravel, and aggregate resources and determine the optimal mine layout for preparation of a formal Mine Plan. Mr. Keith McCandlish, P.Geo., AGL’s Vice President and General Manager conducted the site visit and is the “Qualified Person” as defined in NI 43-101.
The AGL resource estimate was determined from aggregate volumes estimated from depth-to bedrock measurements obtained from ten (10) cored boreholes and on the results from 4,664 metres of seismic refraction surveys undertaken by the Company in 2005 and 2006. Geophysicists from Associated Mining Consultants Ltd. of Calgary, Alberta conducted the geophysical surveys and geologists from AGL have examined the core and core logs obtained subsequently.
The volume of aggregate was determined as the volume of material bounded by the topographic ground surface, (a digital terrain model obtained from an aerial photogrammetric survey), and the bedrock contours, determined from the exploration data using the Gemcom Surpac™ suite of modelling applications. Bedrock data were augmented with three additional sets of points:
•§Field observations and a slope gradient map generated from the topographic data were used to infer the surface limit of the gravel deposit against bedrock topography. This limit was described as a line of points with eastings, northings, and, elevations (X, Y, Z co-ordinates) and a resource thickness of zero.
•§Surface contours in areas determined to have zero aggregate thickness were included in the model as bedrock contours.
•§The results of offshore dive transects which indicated the presence of aggregate to at least a depth of 5 m along the foreshore were included.
Limits consistent with mining and environmental regulations in British Columbia were applied prior to the resource calculation:
•§Material occurring within 30 m of the high water mark (HWM) was eliminated; there is a regulated offset from the HWM for minerals extraction.
•§Material occurring within 5 m of the licence boundaries was not included in the estimate as there is a prohibition against working closer than 5 m to the license boundary in the BC mining code.
•§Material occurring within a band 15 m on either side of the crest of the banks of Donahue Creek was eliminated; working within these limits is forbidden under BC’s environmental code.
The geological modeling and aggregate resource estimation was completed by Susan O’Donnell, Geol.I.T., under the direction of Mr. Keith McCandlish, P.Geo., using the Gemcom-Surpac(TM) suite of geological modeling applications.
The mine planning was completed by Eric Beresford, P.Eng. under the direction of Mr. Peter Cain, Ph.D.,P.Eng., AGL’s Head of Mining Engineering. AGL has relied on aggregate testing results performed by Levelton Consultants of Richmond, B.C. in assessing the quality of the aggregates on the property. This testing was conducted on bulk samples collected by the Company and Portland Canal Aggregates Corporation (“PCAC”).
The Industrial Mineral Resource Estimate tables following provides resource volumes and tonnes for two separate areas, and a third summary table. The separate areas represent the License area held by PCAC and the area (the “extension area”) for which an Investigation Permit was issued by the BC government for PCAC:
License Area Resources
Classification Volume (m3) Mass (t) *
Measured 13,618,365 29,551,852
Indicated 1,848,388 4,011,002
Measured and Indicated 15,466,753 33,562,854
Inferred 203,772 442,185
Extension Area Resources
Classification §Volume (m3) Mass(t)*
Measured 15,384,804 33,385,025
Indicated 2,195,467 4,764,164
Measured and Indicated 17,580,271 38,149,189
Inferred 831,465 1,804,279
Combined Area Resources
Classification §Volume (m3) Mass(t)*
Measured 29,003,169 62,936,877
Indicated 4,043,855 8,775,166
Measured and Indicated 33,047,024 71,712,043
Inferred 1,035,237 2,246,464
*The specific gravity value of 2.17 used to convert volumes to tonnes is the value used by B.C. Government to assess extraction tonnages for royalty revenue purposes.
Material located within 250 m of a drill hole and complemented by geophysical data has been
classified as measured, while material located outside the 250 m radius of a drill hole but still
within 125 m of a geophysical data point has been classified as indicated. Inferred resources
encompass all additional material located outside the optimum range to which the data can
reasonably be projected, but within the limits of mining.
The Company and PCAC are proceeding with the preparation of an Environmental Assessment application (“EAA”) and a Mine Permit application (“MPA”) to the B.C. Government in anticipation of the start up of aggregate production operations.
Micon International Limited of Vancouver, B.C. has been retained to compile the EAA and assist with the Environment Assessment process.
Mr. Eric Beresford, P.Eng., an independent consultant, was retained by AGL to prepare the mine plans to support the EAA and MPA to the B.C. government.
The Technical Report summarizing the above information will be submitted within 30 days and will be available on the Highbank website (www.HighbankResources.com) and through SEDAR (www.sedar.com). This news release has been reviewed and approved by Mr. Keith McCandlish, P.Geo of Associated Geosciences Ltd. , the qualified person under NI 43-101, and by Mr. Peter Cain, Ph.D., P.Eng.
ON BEHALF OF THE BOARD OF DIRECTORS
“JAKE BOTTAY”
Jake Bottay,
President/Director